Warmset WARMWALL BLACK is a modern and excellent alternative to a towel rail. The Warmwall BLACK wall heating features a new infrared technology. This heating system is easy to install in the wall, under the tiles or plaster. It is usually laid in layers of glue or screed. Depending on the size of the room, heating can be done with one or more rolls of WARMWALL Black mesh. Sympli connects to the thermostat, install rails and you have an amazing towel rail and heating source for your bathroom.

Warmset’s Black technology has an outer covering in the form of a polypropylene jacket. For its application to the wall, the WarmWall Black product retains all the technical characteristics of the floor product, with the difference that it can be applied even in those contexts where the use on the floor is difficult or not possible.

The fiberglass mesh on which is fixed the Warmset multilayer laminated ribbon, is gathered in mets for convenient laying; the mesh is also used to be embedded in screed and glue, preventing breaks and cracks. Its application to the wall in the various stratigraphies allows to create a homogeneous radiant surface, providing thermal comfort especially in those contexts where little power is required, allowing the walls to be covered only in the necessary area.

Features:

- No space required, FREE wall's

- No valves, no maintenance.

- Cold tail 3m (please ask if you required over 3m);

- Power: 300 W/m2 (please ask if you required lower or higher power W);

- Surface temperature ~ 50C'

- Insulation resistance up to 170°C;

- Complies with the electrical installation directive (BS7671:2008) standard EN60335-2-96;

- Thanks to its convenient design, the mesh can be easily and quickly installed;

- Extremely thin (only 3 mm);

- Suitable for wet installation under tiles;

- Protection class: IPX7.

The Warmwall wall heating system consists of a 17 mm wide strip placed on a fiberglass mesh with a standard width of 500 mm. The mesh has an average thickness of 3-4mm with a maximum 6mm front and -back joint. The gap between the heating strips varies from ~40mm (depending on the W/m2 power). Thanks to ribbon structure, the Warmwall BLACK mesh does not emit electromagnetic radiation.

The packaging of these wall heating grids is made from at least 40% recycled materials and is environmentally friendly!​​

If your requested size, power or voltage is not in the dropdown menu, we are happy to manufacture any size, power or voltage of your needs.